At G&A Lock Service we have almost any type of safe available to suit your specific requirements. Wall safes, fire rated, burglar rated floor safes, cash drop safes and much more. Below are some sample UL ratings for different safes.

Class 125 - The safe sustains an internal atmosphere of 125 degrees F (52 degrees C) and 80% humidity. The safes are tested with only non-paper media, but are clearly sufficient to hold paper. New, more durable computer media, such as data on compact disks crystallize at 350 degrees F (177 degrees C), which make this type of safe overly-sufficient to store these media. However, Underwriters Laboratories have not tested whether data on Blu-ray disks, DVDs or CDs are altered during testing. They have just tested floppy disks, which are not a common storage medium these days. An added benefit of this safe is that it is waterproof due to a gasket on the door and the label will state this. These class ratings are used in conjunction with hour ratings such as: 1/2, 1, 2, 3, or 4.

Class 150 - The safe sustains an internal atmosphere less than 150 degrees F (66 degrees C) and 85% humidity. UL tests this with paper and non-paper articles. This safe is also sufficient in storing some optical media, such as compact disks. Cases can be purchased that will meet Class 125, if they are placed inside a Class 150 safe. Some may be waterproof due to a gasket on the door and the label will state this. These class ratings are used in conjunction with hour ratings such as: 1/2, 1, 2, 3, or 4.

Class 350 - The safe sustains an internal atmosphere of less than 350 degrees F (177 degrees C) and 85% humidity. This is the most basic of U.L. tests and specifically tests for the storage of paper. The ignition point of paper is 450 degrees F (232 degrees C), so this safe is sufficient for storage of paper. Cases can be purchased that will meet Class 125, if they are placed inside a Class 350 safe. These class ratings are used in conjunction with hour ratings such as: 1/2, 1, 2, 3, or 4.

Class TL-15 - This is a combination locked safe that offers limited protection against combinations of common mechanical and electrical tools. The safe will resist abuse for 15 minutes from tools such as hand tools, picking tools, mechanical or electric tools, grinding points, carbide drills and devices that apply pressure.

Class TL-30 - This is a combination locked safe that offers moderate protection against combinations of mechanical and electrical tools. The safe will resist abuse for 30 minutes from tools such as hand tools, picking tools, mechanical or electrical tools, grinding points, carbide drills, devices that apply pressure, cutting wheels and power saws.

Class TL-40 - This is a combination locked safe that offers moderate protection against combinations of mechanical and electrical tools. The safe will resist abuse for 40 minutes from tools such as hand tools, picking tools, mechanical or electrical tools, grinding points, carbide drills, devices that apply pressure, cutting wheels and power saws.

Class TRTL-30 - This is a combination locked safe that offers high protection against combinations of mechanical, electrical, and cutting tools. The safe will resist abuse for 30 minutes from tools such as hand tools, picking tools, mechanical or electrical tools, grinding points, carbide drills, devices that apply pressure, cutting wheels, power saws, impact tools and, in addition, can withstand an oxy-fuel welding and cutting torch (tested gas limited to 1000 cubic feet combined total oxygen and fuel gas.)

Class TRTL-60 - This class will withstand the same assaults as Class TRTL-30 for 60 minutes.

Note: There are many other ratings, this is just a small example.